News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Stall speed question.  (Read 555 times)

    Offline roadman5312

    • Sr. Resident
    • ******
    • Posts: 5688
    Stall speed question.
    « on: October 25, 2015 - 02:07:10 PM »
    OK, here's our question. Were going to put a 360 in the 67 Barracuda, stock 74 4 barrell motor runs good. Very strong. Using a 727 that has manual shift valve body. So would this transmission require a higher stall converter than stock ?  Also since its manual shift is the kickdown linkage still required ?  Thanks in advance     :cheers:

     :rebel:
    Logged


    Offline Katfish

    • Resident
    • *****
    • Posts: 3733
    • 70 Challenger
    Re: Stall speed question.
    « Reply #1 on: October 25, 2015 - 03:00:27 PM »
    Higher stall wouldn't hurt, no need for KD linkage with manual valve body.
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Stall speed question.
    « Reply #2 on: October 25, 2015 - 10:18:15 PM »
    What rear gear ratio ?
     the A body will be lighter than the vehicle the 360 ame out of & the 360 has better tq too so you may want to try it with the stock converter but as above 2200 stall will help
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »