G3 Hemi Motor Mounts

[3D]

What's everyone using for motor mounts?
I got a 2004 truck 5.7 and a 70 E body.
Thanks

[twoterpilot]

I just did this with the same 2004 truck 5.7 in my74 challenger and I used the TTI mounts.

Twoterpilot

[GoodysGotaCuda]

I just did this with the same 2004 truck 5.7 in my74 challenger and I used the TTI mounts.

Twoterpilot

Did you use their headers? If so, how did they fit?


TTI seems to be the only one making conversion mounts. I've seen mixed results on having to bang up their headers to fit with them though.

[twoterpilot]

Goodys,

 I used the stock exhaust on the drivers side and the stock jeep 5.7 manifold on the passenger side. the driver side manifold just touches the steering box so I used some shims and a light bit of grinder work on the manifold to get the needed clearance. it all bolted together with no problems but I didn't want the heat transfer from the exhaust to the steering box.

Twoterpilot

[GoodysGotaCuda]

Goodys,

 I used the stock exhaust on the drivers side and the stock jeep 5.7 manifold on the passenger side. the driver side manifold just touches the steering box so I used some shims and a light bit of grinder work on the manifold to get the needed clearance. it all bolted together with no problems but I didn't want the heat transfer from the exhaust to the steering box.

Twoterpilot

Very cool. I didn't know any manifolds would fit. Do you have any part numbers?

[twoterpilot]

for Jeep Non- SRT   LT: 53013605AB, RT: 53013605AB. I don't have the number for the truck driver side as mine came with the engine.

Twoterpilot