3 speed wiper wiring harness?

[ad263210]

Hello all,

I am finalizing my 3 speed conversion and I have all of the parts ready to go. I can't seem to find out where to get a 3 speed wiring harness to plug in the 3 speed wiper motor to the switch. Does anybody make any wiring clips that plug into the 3 speed motors? I currently have a 2 speed clip from when I had a 2 speed motor.

I could probably make it work but it will look far from stock, so that option isn't preferred.

Thanks for your time.
Anthony

[anlauto]

The dash harness is the same at the switch for both the 2spd and 3spd wiper switches.

[JayBee]

Here's a couple pictures of the 2 switches for a 1970.

2 speed


3 speed/variable

[ad263210]

Okay, I am new to the tech side of cars so please bare with me.

I am needing to find a "clip or plug" to work with the white clip featured in the photo below. My 2 speed "plug" that is in my harness doesn't seem to fit.

I looked at year one, but they seam to have only the two speed harness for the wiper assembly.

Sorry for the confusion!

[Pimtao]

That white cable goes straight into then bulckhead on the fire wall. As far as I know

[anlauto]

Tim is right, that wiper motor plugs into the bulkhead on the firewall with the other three harnesses 

[JayBee]

This is probably the picture you were after.



P.S. Engine bay was painted after this was taken.