Author Topic: Non-Rallye in-dash tachometer  (Read 4018 times)

Offline Archialfa

  • Jr. Member
  • **
  • Posts: 210
Non-Rallye in-dash tachometer
« on: February 19, 2016 - 10:52:32 AM »
Did anyone install this tach in a non-Rallye dashboard?

http://www.classicindustries.com/product/mopar/e-body-challenger/parts/me1316.html

I'd like to install a tach and this seems to be the best solution because I can use the blank slot (no clock there) and not to have an additional tach hanging outside of the dashboard.

Opinions?
1970 Challenger 440 Magnum

Build thread: http://www.cuda-challenger.com/cc/index.php?topic=113902




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: Non-Rallye in-dash tachometer
« Reply #1 on: February 19, 2016 - 12:07:44 PM »
I have never installed one but have seen them, good solution to no tach and better than screwing one down to the dash pad or using a big hose clamp on the column.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline dfrazz

  • 1970 Cuda - 1968 Charger
  • Resident
  • *****
  • Posts: 4070
Re: Non-Rallye in-dash tachometer
« Reply #2 on: February 20, 2016 - 10:38:46 AM »
I had Redline install their tach on my '71 Challenger and loved it!  http://redlinegaugeworks.com/





Offline jordan

  • Full Member
  • ***
  • Posts: 601
  • no replacement for displacement
Re: Non-Rallye in-dash tachometer
« Reply #3 on: February 20, 2016 - 03:05:58 PM »
I had redline install an oil pressure gauge where the clock goes, and then clamped a sun tach onto the column that is big enough to actually see when you are giving it full throttle.  If you have enough horsepower, it takes some skill and guts to take your eyes off the road long enough to look at a tach, much less look for a small tach.  I just realized that I don't really watch my tach too often anyway.  My auto will shift at the right RPM and if you are doing your own shifting, going by sound is usually pretty close anyway. 
"Don't brake until you see God!"

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Non-Rallye in-dash tachometer
« Reply #4 on: February 20, 2016 - 05:23:21 PM »
Just another option....   I had Speedhut  make custom gauges
http://www.speedhut.com/?_vsrefdom=adwords&gclid=CImEmKixh8sCFQMQaQodC8IJKA



« Last Edit: February 20, 2016 - 05:26:21 PM by brads70 »
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: Non-Rallye in-dash tachometer
« Reply #5 on: February 20, 2016 - 08:50:29 PM »
Very nice Brad.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Non-Rallye in-dash tachometer
« Reply #6 on: February 21, 2016 - 12:44:46 AM »
Just for glancing at, they are cool, but for real use, if it isn't in yer face, you miss the shift points by a few hundred rpms, which results in missing your power band and can loose a race when running an experienced opponent..  Myself and the hp levels I used to have. I would just keep the nose of my car right in front of yours anyways, with plenty of power still on tap. Getting you to over wind your engine and spin some bearings or float a valve. I know it was mean, but when it come down to chevy and ford boys, I would send you back to your garage in a heart beat, knowing your hood was coming off and you were eating beans for a month.    It's alwys fun hearing someone say they had a 500 hp engine and 200hp in NOS on their 3700 lb car. That only meant 50 -100 bucks coming my way on a road race sat night.  Math was always fun back in the day. Watch out for turbos, n boost. times are changing. Choose your battles wisely. If a bet is over 1k usually they have 1200 hp or so.  So should you.  Why n how do I find myself going so deep into this stuff anymore.?  Non rally tachs are cool guys. Just keep your eyes on the road

Offline Archialfa

  • Jr. Member
  • **
  • Posts: 210
Re: Non-Rallye in-dash tachometer
« Reply #7 on: May 28, 2016 - 01:12:51 PM »
Just another option....   I had Speedhut  make custom gauges


Looks fantastic!!!  :ylsuper:
1970 Challenger 440 Magnum

Build thread: http://www.cuda-challenger.com/cc/index.php?topic=113902