Author Topic: 70 Cuda Tail Panel Clips (Read 2765 times)

E-Body Products · « **on:** December 12, 2014 - 04:32:21 PM »

Ok, so I'm trying to install the tail panel trim and the plastic clips barely fit in the mounting holes. And for sure the plastic pins won't go in after installed because the four prongs are almost entirely closed up. The holes are the same as oem as I took the measurements from my original tail panel. Am I missing something?

E-Body Products
www.ebodyproducts.com
606-481-9014

E-Body Products · « **Reply #1 on:** December 12, 2014 - 04:34:57 PM »

E-Body Products
www.ebodyproducts.com
606-481-9014

dmk67 · « **Reply #2 on:** December 12, 2014 - 05:02:56 PM »

The clip should mount on tail panel push the pin end to hold then with your fist tap on molding.dont for get the end clip with threaded stud on moulding before snapping into place.

E-Body Products · « **Reply #3 on:** December 12, 2014 - 05:28:49 PM »

Found another set of clips and they are made correctly.

E-Body Products
www.ebodyproducts.com
606-481-9014

E-Body Products · « **Reply #4 on:** December 12, 2014 - 06:00:58 PM »

E-Body Products
www.ebodyproducts.com
606-481-9014

HP_Cuda · « **Reply #5 on:** December 13, 2014 - 02:06:28 PM »

Have any pics of the corners before install? I believe they are not the same plastic retainer but some sort of bolt on right?

B

E-Body Products · « **Reply #6 on:** December 13, 2014 - 03:49:35 PM »

Yes, the corners are bolt on. Metal clips with stamped nuts (3 per side).

E-Body Products
www.ebodyproducts.com
606-481-9014

E-Body Products · « **Reply #7 on:** December 13, 2014 - 03:52:02 PM »

I can tell you, the plastic clips that worked had small o-rings around them to seal up the mounting holes.

E-Body Products
www.ebodyproducts.com
606-481-9014

loco340cuda · « **Reply #8 on:** December 13, 2014 - 06:34:38 PM »

Looking good! Was that tail panel trim original or reproduction?

E-Body Products · « **Reply #9 on:** December 13, 2014 - 06:46:48 PM »

The trim was original. I took the dents out and polished it using Cody's videos as a reference.

E-Body Products
www.ebodyproducts.com
606-481-9014

E-Body Products · « **Reply #10 on:** December 14, 2014 - 01:31:21 PM »

E-Body Products
www.ebodyproducts.com
606-481-9014

loco340cuda · « **Reply #11 on:** December 14, 2014 - 02:19:06 PM »

Thanks for the info. It came out looking great!

E-Body Products · « **Reply #12 on:** December 14, 2014 - 03:13:06 PM »

Quote from: loco340cuda on December 14, 2014 - 02:19:06 PM

Thanks for the info. It came out looking great!

Thanks!!!

E-Body Products
www.ebodyproducts.com
606-481-9014

Author Topic: 70 Cuda Tail Panel Clips (Read 2765 times)

E-Body Products

70 Cuda Tail Panel Clips

E-Body Products

Re: 70 Cuda Tail Panel Clips

dmk67

Re: 70 Cuda Tail Panel Clips

E-Body Products

Re: 70 Cuda Tail Panel Clips

E-Body Products

Re: 70 Cuda Tail Panel Clips

HP_Cuda

Re: 70 Cuda Tail Panel Clips

E-Body Products

70 Cuda Tail Panel Clips

E-Body Products

Re: 70 Cuda Tail Panel Clips

loco340cuda

Re: 70 Cuda Tail Panel Clips

E-Body Products

Re: 70 Cuda Tail Panel Clips

E-Body Products

Re: 70 Cuda Tail Panel Clips

loco340cuda

Re: 70 Cuda Tail Panel Clips

E-Body Products

Re: 70 Cuda Tail Panel Clips