Author Topic: need a 833 exploded view  (Read 2414 times)

Offline OUTLAW

  • MASTER OF ALL THINGS MOPAR
  • Sr. Member
  • ****
  • Posts: 1002
  • I didn't say you can't RACE--I said you can't WIN
    • MOPAR-MADNESS  WEB/FORUM
need a 833 exploded view
« on: May 04, 2005 - 02:30:39 PM »
Damn a new tranny and it has expensive noises comming out of it after only 3000 miles. If anyone can scan the tranny rebuild section from a service manual with the exploded view and post or send it too me I'll be forever in your debt.

Hey chryco
did you say they make a special pilot bushing for a 4 speed in an automatic crank? got any idea on the part # or if its stilll available? I'm hoping against hope that I broke up a pilot bushing and the first motion shaft is just flobbleing around




Offline Mopar73340

  • Sr. Member
  • ****
  • Posts: 1130
Re: need a 833 exploded view
« Reply #1 on: May 04, 2005 - 05:22:10 PM »
Outlaw try these, hope they help..
73-Challenger 340 727/GearVendors Auto
73-Challenger 408 Pistol-Grip 5-speed

Offline OUTLAW

  • MASTER OF ALL THINGS MOPAR
  • Sr. Member
  • ****
  • Posts: 1002
  • I didn't say you can't RACE--I said you can't WIN
    • MOPAR-MADNESS  WEB/FORUM
Re: need a 833 exploded view
« Reply #2 on: May 04, 2005 - 06:48:15 PM »
thanks ...all info helps

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: need a 833 exploded view
« Reply #3 on: May 05, 2005 - 12:13:42 AM »
I don`t have the part # handy but it is the Dakota roller pilot brg , under $20  any Mopar dealer should be able to get it for you
 it could also be the roller eating into the counter shaft pin , these are a vailable new from Passion Perf www.passionperformance.com

Challenger - You`ll wish You Hadn`t

Offline heminut

  • Resident
  • *****
  • Posts: 2023
  • owner of the poor man's Hemi Cuda
Re: need a 833 exploded view
« Reply #4 on: May 05, 2005 - 08:19:33 AM »
The part # I have is #53009180. I believe that's a Mopar number but I'm not sure. The number can be crossed over at most auto parts stores to their number.
1970 5.7 Hemi Cuda

Offline OUTLAW

  • MASTER OF ALL THINGS MOPAR
  • Sr. Member
  • ****
  • Posts: 1002
  • I didn't say you can't RACE--I said you can't WIN
    • MOPAR-MADNESS  WEB/FORUM
Re: need a 833 exploded view
« Reply #5 on: May 05, 2005 - 12:34:17 PM »
I got lucky and found the pilot bushing last nite now all i got to do is tear the tranny out -fix it and back in b4 toorrow nites cruise ...oh ya and work all day todoay too ....LOL

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: need a 833 exploded view
« Reply #6 on: May 05, 2005 - 10:16:00 PM »
No prob  :coffee:

Challenger - You`ll wish You Hadn`t