Cuda roof taper measurements

[calicuda70]

So guys with the AMD roof this taper part around the rear window is not there if some one who has there lead removed from the seam and can get the measure menus I would much appreciate it picture below to show you there area I'm talking about just need to know how long and wide it is when it meats the quarter panel thanks again.

James

[3D]

I got these pictures from last summer. i took the lead off one of my parts cars.
Not quite sure i understand your question?

[calicuda70]

On the upper part of the roof it comes to a point on the rear window I just need to know how long and how wide it is so I can duplicate it.

[sassygreen]

This is when you need to get your trim. That way you can assure yourself a good fit to the trim.  Style line and trim fitment need to be worked out together. Style line can be up or down the back glass so long as it is symmetrical to the left and right side.

[calicuda70]

Trim fit is not the issue just trying to figure out how long it is to the point is what matters