Author Topic: coat hook position  (Read 1267 times)

Offline taxspeaker

  • Jr. Member
  • **
  • Posts: 33
coat hook position
« on: March 21, 2015 - 03:13:41 PM »
When I bought my 70 aar the coat hooks were in the glovebox after they had put on a new headliner I guess-not sure. I am wrapping up the very last few items on it and would like to re-attach them, but I don't want to damage the headliner and I do not know exactly where they go. Does anyone have a measurement of how far back or forward from a common point they are and how high they are off the moulding?
Thanks
Bob J
Matching Alpine White/ Black Vinyl Top
Matching console/black interior automatic
1970 AAR Cuda (numbers matching)
1970 Superbird (unrestored)
We drive em! Watch out on I-65 in the Midwest and honk!




Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Re: coat hook position
« Reply #1 on: March 21, 2015 - 03:18:20 PM »
not sure of exact position but feel around the general area pressing lightly on the headliner for a screw head. Any good upholstery shop knows to leave the screws in so they can be found.

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: coat hook position
« Reply #2 on: March 21, 2015 - 04:53:37 PM »
Actually on a 70 Cuda the coat hooks go through the rear sail panels. If those were replaced with reproductions you might be SOL as far as finding the original holes. :2cents:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline taxspeaker

  • Jr. Member
  • **
  • Posts: 33
Re: coat hook position
« Reply #3 on: March 21, 2015 - 08:34:02 PM »
Thanks-I can find them on B bodies but this is my first e body. On sail panels-any general idea-center of sail panel or right side?
Thanks
Matching Alpine White/ Black Vinyl Top
Matching console/black interior automatic
1970 AAR Cuda (numbers matching)
1970 Superbird (unrestored)
We drive em! Watch out on I-65 in the Midwest and honk!

Offline taxspeaker

  • Jr. Member
  • **
  • Posts: 33
Re: coat hook position
« Reply #4 on: March 21, 2015 - 10:05:12 PM »
OK found this picture online-look right?
Matching Alpine White/ Black Vinyl Top
Matching console/black interior automatic
1970 AAR Cuda (numbers matching)
1970 Superbird (unrestored)
We drive em! Watch out on I-65 in the Midwest and honk!

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: coat hook position
« Reply #5 on: March 21, 2015 - 10:49:13 PM »
Yes, if the sail panels are original or at least recovered originals, you should be able to find the hole. Personally, if that's not the case....I would just drill new holes in that general area :2cents:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com