Author Topic: Trans temp sender location (Read 1106 times)

crash340 · « **on:** February 20, 2015 - 11:59:06 PM »

Team,
What is the best place to install the trans temp gauge sender??? in the side wall of the Pan??

734406pk · « **Reply #1 on:** March 09, 2015 - 10:58:25 PM »

Yes the pan would be best. You will get the sump temp. 2nd best would be in the front cooler line to the trans cooler. The fluid temp here will be somewhat higher than the sump.

crash340 · « **Reply #2 on:** March 10, 2015 - 04:45:09 AM »

Thanks 734406, appreciate it.

Moparal · « **Reply #3 on:** March 10, 2015 - 02:54:06 PM »

I used to take the trans tube n stick out of a 70's motor home. It was in the stick, made things easy, then the right ohm gauge or factory gauge. But I'd put it in the pan like the newer ones came with now a day

Chryco Psycho · « **Reply #4 on:** March 13, 2015 - 11:17:22 PM »

If you put it into the cooler line make Sure the sensor doesn't restrict the cooler line flow , so use a tee & space it back from the line , if the line is restricted you may be causing the problem !

crash340 · « **Reply #5 on:** March 14, 2015 - 06:09:24 AM »

I think I'll just run it into the side of the pan next time its off. I dont have a gauge right now but would like to just be monitoring it

Author Topic: Trans temp sender location (Read 1106 times)

crash340

Trans temp sender location

734406pk

Re: Trans temp sender location

crash340

Re: Trans temp sender location

Moparal

Re: Trans temp sender location

Chryco Psycho

Re: Trans temp sender location

crash340

Re: Trans temp sender location