Author Topic: 727 lost 2nd gear (Read 4031 times)

msbaugh · « **Reply #15 on:** July 14, 2015 - 09:07:06 PM »

I've got the whole trans disassembled except for the output shaft and planetary assembly. After removing the selective snap ring from the forward end of the shaft I still cannot get the front planet off... It wiggles back and forth but it will not pass the groove where the snap ring was. I've been trying forever and I'm afraid to pry on it

Hard not to get discouraged after seeing ring grooves on bearing surfaces and nicks everywhere. I'm going to have a lot of parts to order...

brads70 · « **Reply #16 on:** July 14, 2015 - 09:14:44 PM »

Maybe buying another core would be cheaper to get the parts you need?

msbaugh · « **Reply #17 on:** July 17, 2015 - 06:16:30 PM »

Got everything figured out and parts are on the way!! Were these transmissions painted from the factory? I had my case put in the cleaning machine and it came back with green primer looking stuff peeling all over it.

msbaugh · « **Reply #18 on:** July 18, 2015 - 07:03:57 PM »

....lots of scrubbing later... now looking a beautiful dull aluminum color. Maybe I'll polish and clear coat, maybe I'll paint it bright aluminum color... Can't decide

1 Wild R/T · « **Reply #19 on:** July 19, 2015 - 03:44:55 AM »

If you'd like it to look like it's 1970 all over again look into vapor blasting...

msbaugh · « **Reply #20 on:** July 20, 2015 - 12:31:32 PM »

I went with the $6.99 option... I coated it in aluminum engine enamel, which is oil, scratch and heat resistant. ...we'll see how long it lasts. I'm happy with the results, just wanted it to look good

Author Topic: 727 lost 2nd gear (Read 4031 times)

msbaugh

Re: 727 lost 2nd gear

brads70

Re: 727 lost 2nd gear

msbaugh

Re: 727 lost 2nd gear

msbaugh

Re: 727 lost 2nd gear

1 Wild R/T

Re: 727 lost 2nd gear

msbaugh

Re: 727 lost 2nd gear