Author Topic: Sensors on a 6.1 Hemi  (Read 2211 times)

Offline soundcontrol

  • Sr. Member
  • ****
  • Posts: 1603
Sensors on a 6.1 Hemi
« on: October 15, 2015 - 06:29:44 AM »
Gen 3 Hemi 101...
Trying to firure out all the sensors on the engine, this is what I got so far.
First 2 pics, -knock sensors.
Pic 3 - cam sensor.
Pic 4 - Oil pressure (right above the oil filter)
Pic 5 - Throttle control, (drive by wire, not a sensor, just a connector)
Pic 6 - Is this Temperature? (under the throttle body)
Pic 7 - Ignition Capacitor


Crank sensor, behind the starter on the passenger side, did not get a pict of that one.
Now, where is the IAT and the MAP sensors? I assume they are located before the thottle body?




« Last Edit: October 18, 2015 - 05:27:30 PM by soundcontrol »
/ Ken
Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=102525.0
topic=108917.new#new




Offline Todd440

  • Jr. Member
  • **
  • Posts: 35
Re: Sensors on a 6.1 Hemi
« Reply #1 on: October 19, 2015 - 10:49:50 AM »
Yes on the temp sensor.
MAP at the rear of the intake.
IAT would be in the intake hose, from air box.

Offline soundcontrol

  • Sr. Member
  • ****
  • Posts: 1603
Re: Sensors on a 6.1 Hemi
« Reply #2 on: October 19, 2015 - 11:11:56 AM »
Yes on the temp sensor.
MAP at the rear of the intake.
IAT would be in the intake hose, from air box.


Thanks! I must have missed the MAP sensor, thought I looked there, will look again.
/ Ken
Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=102525.0
topic=108917.new#new