rear louver picture request

['Cuda Hunter]

I would like to see some pictures of the rear window louvers on both challengers and cuda's. 

both on and off the car.     I would like a side by side comparison also.  Can someone help out?

[Chryco Psycho]

https://www.google.com/search?q=cuda+pix+with+louvers&espv=2&biw=1366&bih=643&tbm=isch&imgil=i_iT6iOrUrZoDM%253A%253BPqiwxbOKAQM95M%253Bhttp%25253A%25252F%25252Fwww.highhorseperformance.com%25252FLimited_Parts_Ind_70_74_Plymouth_Cuda_LP302_p%25252Flp302.htm&source=iu&pf=m&fir=i_iT6iOrUrZoDM%253A%252CPqiwxbOKAQM95M%252C_&usg=__qzvlJy2kT_ErVSfHSsKc9sWh44c%3D&ved=0CCYQyjdqFQoTCMKT-KfQ68cCFcJ3Hgodf20BIQ&ei=uwbxVYLKLMLvef_ahYgC#imgrc=i_iT6iOrUrZoDM%3A&usg=__qzvlJy2kT_ErVSfHSsKc9sWh44c%3D

https://www.google.com/search?q=Challenger+pix+with+louvers&espv=2&biw=1366&bih=643&tbm=isch&tbo=u&source=univ&sa=X&ved=0CBwQsARqFQoTCOzxvMvQ68cCFUyrHgodcPIFlQ#tbm=isch&q=70+Challenger+pix+with+louvers

 here are a few 

['Cuda Hunter]

thanks, lots of pictures there. 
 
Unfortunately I don't see any side by side comparison's.

Can someone confirm how they fit on the wrong model? 

I think I purchased a set that has ended up being a challenger set.  But I don't know enough about them to confirm that.

[Chryco Psycho]

Challenger louvers have the bottom slat even width all the way across with a squared corner
 Cuda the bottom slat get much thinner in the lower corners & is curved

[anlauto]

That's kinda what I understood....Challenger are straight across the bottom where as Cuda are curved 

['Cuda Hunter]

['Cuda Hunter]

['Cuda Hunter]

['Cuda Hunter]

what do you guys think?

[dave73chally]

Just installed mine from dale's cuda shop on my challenger:

['Cuda Hunter]

Those louvers are on my cuda.  Don't fit so Chally for sure right.

The louvers I just got look like the ones n daves car. 

[Chryco Psycho]

could be , I know the bottom slat gets very narrow in the corner of the cuda louver , the window are different widths between Cuda & Chall so if it doesn't fit those could be Chall

[1 Wild R/T]

Those louvers are on my cuda.  Don't fit so Chally for sure right.

The louvers I just got look like the ones n daves car.

No, your aren't Challenger... Look at the bottom slat.. Challenger is fairly straight, yours is curved... I think you have Cuda Louvers that have been tweaked....

[Katfish]

Check the pics from 71Cuda, you'll see Challenger louvers are super wide on a Cuda, you can tell the difference.

http://board.moparts.org/ubbthreads/ubbthreads.php/ubb/showflat/Number/6557958/site_id/1

[AARuFAST]

CudaHunter yours look correct.
Challenger bottom louver is wider.
Prop something under the bottom so they sit correct and look at them
Pic taken from Dales Shop