Author Topic: Looking for Reputable Company for Driveshaft For The Challenger (Read 656 times)

daveh · « **on:** March 29, 2017 - 10:14:17 AM »

Hi Guys,

I�m finished installing the TKO 600 trans and new rear leaf springs to get the stock ride height over the Super Stock springs that were installed on the Challenger. So now I�m ready to order the driveshaft. I just need a standard steel balanced driveshaft. Since it was purchased from Keisler I�m out of luck getting the one that�s supposed to come with the Keisler kit. Oh well�

So I�m looking for a solid, reputable company that I can get a driveshaft. Any suggestions are greatly appreciated. Thanks

solarguy · « **Reply #1 on:** March 29, 2017 - 10:44:15 AM »

Hey Dave, No personal experience but a friend had work done by them and was satisfied. Plus, they're close by.

http://www.browardpowertrain.com/

daveh · « **Reply #2 on:** March 29, 2017 - 10:50:59 AM »

Awesome thanks Solarguy. They are pretty close only about 40 minutes. I�ll give them a call.

burdar · « **Reply #3 on:** March 29, 2017 - 11:00:09 AM »

You can also just have your stock shaft shortened if it's too long. I've had that done a couple times.

Author Topic: Looking for Reputable Company for Driveshaft For The Challenger (Read 656 times)

daveh

Looking for Reputable Company for Driveshaft For The Challenger

solarguy

Re: Looking for Reputable Company for Driveshaft For The Challenger

daveh

Re: Looking for Reputable Company for Driveshaft For The Challenger

burdar

Re: Looking for Reputable Company for Driveshaft For The Challenger