help with wheel seals

[hato]

so yea another hiccup  the seals i got dont work i need ones for a 1.73 inside diameter  and 2.6  outside diameter the local parts jockeys cant help and tired of running into problems thanks in advance for any help 

[1 Wild R/T]

What spindle & rotor are you using?  Never mnd,  1.73 is the typical 70-71 spindle & 2.622 is a 73 & up rotor....

I think your best bet is a National 472185   The OD & width are good, the ID is .020 O/S but since the typical seal lip deflection is .060.. & your sealing grease not a fluid it should be fine...

[hato]

 :wow:I was just in the garage mocking it up it looks like I might need the 73 spindle I can order those though dr diff right?  I should mention the rotors and seals are from him as well

[1 Wild R/T]

Why do you need the 73 spindle?  It'll bolt right on so it's a good upgrade but I'm guessing you got the rotors & the bearing spacers from Dr Diff?

[hato]

I did get the rotors and bearing spacers from him few places wanted crazy money for rotors lol

[1 Wild R/T]

So use your spindle, the spacers, bearings & rotors you got from Cass & a pair of National 472185 seals.. You should be good to go..

[hato]

Awesome this boards the best thanks for the help gonna pick em up in the morning and finally can finish the t/a suspension. If I get another setback am just storing it till summer lol