Author Topic: Ford Starter Solenoid  (Read 1122 times)

Offline WildJones

  • Jr. Member
  • **
  • Posts: 227
Ford Starter Solenoid
« on: November 19, 2015 - 02:17:35 PM »
For those of you who have added a Ford Starter Solenoid, which one did you use or where did you order from? I looked on Rockauto for '69 302 mustang starter solenoid and they have all kinds ranging from $5 to $20, standard duty vs heavy duty. Can someone point me in the right direction please?
Mike
95682
1970 Cuda




Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: Ford Starter Solenoid
« Reply #1 on: November 19, 2015 - 03:13:15 PM »

You could also try npdlink.com
1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Ford Starter Solenoid
« Reply #2 on: November 19, 2015 - 04:52:09 PM »
I guess my question is why ?
 ford starters work differently & the solenoid shunts a lot more power than the Mopar

Challenger - You`ll wish You Hadn`t

Offline WildJones

  • Jr. Member
  • **
  • Posts: 227
Re: Ford Starter Solenoid
« Reply #3 on: November 19, 2015 - 05:22:16 PM »
I guess my question is why ?
 ford starters work differently & the solenoid shunts a lot more power than the Mopar
I'd like to move my battery to the trunk for weight distribution. With a Ford Starter Solenoid the wire that runs to the starter wouldn't be hot all the time, only when cranking. This seems like a wise decision when making a long run of cable that will run high current. Chrysler uses one for Jeep I believe that I would not mind using, but don't know which model to look at.
Mike
95682
1970 Cuda

Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Re: Ford Starter Solenoid
« Reply #4 on: November 19, 2015 - 05:40:19 PM »
I'd like to move my battery to the trunk for weight distribution. With a Ford Starter Solenoid the wire that runs to the starter wouldn't be hot all the time, only when cranking. This seems like a wise decision when making a long run of cable that will run high current. Chrysler uses one for Jeep I believe that I would not mind using, but don't know which model to look at.
                        :iagree:  I've done that in the past on Pro Street cars, battery in trunk. I just went to Auto Zone, purchased a solenoid for a 69 Cobra Jet Mustang.  Never a problem. Be aware that the solenoid grounds thru its mounting bolt holes, I always run an additional ground wire.         :rebel: