Author Topic: truetrac noise, finally found it, not sure I can fix it! (Read 21343 times)

TelisSE440 · « **Reply #45 on:** January 17, 2016 - 07:43:59 AM »

Quote from: 1 Wild R/T on January 10, 2016 - 12:24:07 PM

As long as it's a clutch style, not a cone style... Cone style was junk when new & most are plain worn out....

I have the 489 case untouched until now. Didn't have a problem for two years but I would be less concerned if I had the clutch style one...

Jousi · « **Reply #46 on:** January 17, 2016 - 08:09:39 AM »

Here is video of my Truetrac, don�t mind the dial, the car is shaking but the noise is just same when descending clutch pressed or neutral:

https://www.youtube.com/watch?v=D5_5L7Vp3VI

dodj · « **Reply #47 on:** January 17, 2016 - 11:36:38 AM »

Quote from: crash340 on January 12, 2016 - 04:08:53 AM

its hit and miss I believe,

Hmmmm. I'm thinking I should rebuild the 489's I have myself. Any good places online or books to read to learn how to do it?

Not keen on spending 1400 bucks on hit or miss.

crash340 · « **Reply #48 on:** January 17, 2016 - 12:04:28 PM »

They are easy to do, just need a good torque wrench, the factory manual has the info you need, I'm sure if you don't have one someone can copy those pages for you, also get the crush sleeve elimination kit from Cass along with a rebuild kit and your gtg.

Author Topic: truetrac noise, finally found it, not sure I can fix it! (Read 21343 times)

TelisSE440

Re: truetrac noise, finally found it, not sure I can fix it!

Jousi

Re: truetrac noise, finally found it, not sure I can fix it!

dodj

Re: truetrac noise, finally found it, not sure I can fix it!

crash340

Re: truetrac noise, finally found it, not sure I can fix it!