Flush mounted glass

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 [2]

    Author Topic: Flush mounted glass  (Read 4933 times)

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: Flush mounted glass
    « Reply #15 on: June 02, 2016 - 07:21:09 AM »
    My brother-in-law and I were one of the first people to do this to a Cuda back in 1993. We welded filler pieces all around each window to fill the gaps then used the "T" shape trim from a Dodge Caravan.
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com


    Offline 70chall440

    • Sr. Resident
    • ******
    • Posts: 6484
    Re: Flush mounted glass
    « Reply #16 on: June 02, 2016 - 10:48:51 AM »
    Thanks Alan, unfortunately welding filler panels into the car is no longer an option. Several people have done it by using thick or stacks of Buytl tape and then using a T molding. Unfortunately, no one seems to be willing to explain exactly how thick or how much tape to use and what width of T molding works the best.
    Logged
    Current Mopar
    70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
    05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
    Past Mopars
    9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

    Offline Cudakiller70

    • Sr. Member
    • ****
    • Posts: 1765
    Re: Flush mounted glass
    « Reply #17 on: June 02, 2016 - 12:07:19 PM »
    Quote from: 70chall440 on June 02, 2016 - 10:48:51 AM
    Thanks Alan, unfortunately welding filler panels into the car is no longer an option. Several people have done it by using thick or stacks of Buytl tape and then using a T molding. Unfortunately, no one seems to be willing to explain exactly how thick or how much tape to use and what width of T molding works the best.

    I know nothing of how to do this, but do have experience with butyl tapes, it might be better to use a hard shim to get and hold the window at the right height.  :dunno:  :2cents:
    http://www.amazon.com/Plastic-Horseshoe-Shims-16-Blue/dp/B005NZSZ4U
    Logged
    Auto spell I'm tired of your shirt
    The above is just my opinion
    Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
    John Adams

    Offline YellowThumper

    • Sr. Member
    • ****
    • Posts: 1633
    • I left the snow for this?
    Re: Flush mounted glass
    « Reply #18 on: June 02, 2016 - 01:43:38 PM »
    Quote from Johns Cuda Shop build. Page 28

    Re: 71 Cuda Pro-Touring Build
    « Reply #407 on: September 15, 2015 - 02:53:11 PM »
    Quote
    Quote from: mrob on September 03, 2015 - 04:02:11 PM
    Hey John, question about the front and rear glass. I noticed that you don't have the stainless steel trim. Did you just replace that with some sort of rubber seal? Just curious how you did that.
    I flush mounted the AMD front and rear glass by stacking two 5/16 square buytl tape on top each other to get the depth and a 3/4 universal t molding glued in with super fast urethane ... :bigsmile:
    Logged
    Removing the warning labels one at a time.
    Nature will take care of the rest.

    Offline 70chall440

    • Sr. Resident
    • ******
    • Posts: 6484
    Re: Flush mounted glass
    « Reply #19 on: June 02, 2016 - 05:55:12 PM »
    Thanks.  :bigsmile:
    Logged
    Current Mopar
    70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
    05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
    Past Mopars
    9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)
    Pages: 1 [2]
    « previous next »