Little metal wiring brackets

[jamesroney]

Hello, Does anyone know where to source the little metal wiring loom brackets that are welded to the inner fender?  They look like 1/2 inch x 2.5 inch x 20 ga, with vinyl dip on them.

Mine broke off at the spot weld, and I can't seen to find them.  (...or do you guys just make them?)

[Challenger in NC]

Hello, Does anyone know where to source the little metal wiring loom brackets that are welded to the inner fender?  They look like 1/2 inch x 2.5 inch x 20 ga, with vinyl dip on them.

Mine broke off at the spot weld, and I can't seen to find them.  (...or do you guys just make them?)

Here's one of several sources. You could also make them I guess, as the one shown here is pretty pricey. Might be able to find something close that is cheaper somewhere else.

http://www.pentastarparts.com.au/store/index.php?l=product_detail&p=6827

[roadman5312]

           $12.50.  I think I would make my own, not to hard to do. 

[blown motor]

That company is in Australia. Shipping to North America will inflate the cost.

[anlauto]

What kind of car do you have where those are welded to the inner fender ?

[jamesroney]

...The kind of car where the owner doesn't know the difference between an inner fender, and a lower cowl / firewall.

BS23N0E...

[ekW]

make them like this .. simple 

[anlauto]

...The kind of car where the owner doesn't know the difference between an inner fender, and a lower cowl / firewall.

BS23N0E...

Gotcha

[AARTA340]

If memory is correct, there are some on the driver side inner fender for the starter cables as well. 

[1 Wild R/T]

If memory is correct, there are some on the driver side inner fender for the starter cables as well. 

Those attach with a screw...