Author Topic: Challenger rear window filler panel, partial  (Read 634 times)

Offline Sinatra

  • Jr. Member
  • **
  • Posts: 126
Challenger rear window filler panel, partial
« on: March 05, 2016 - 11:14:36 AM »
This is a partial "DynaGoodStar" (non-AMD) rear window filler panel I bought for my car.  I only needed a little bit at the end of the left side of it, so I lopped off a little more than necessary.  The rest of the panel is still very useful if you don't need to replace the last five inches or so of yours.  Great if you mainly have an issue in the RH quarter seam area, or center of the panel, window frame or trunk rail.  Just hoping to recoup a little of the money spent on an entire panel for the six or so square inches I needed.

$45 + shipping.  Can ship UPS without oversize fees from 49802.




Offline Rdchallenger12

  • Jr. Member
  • **
  • Posts: 446
Re: Challenger rear window filler panel, partial
« Reply #1 on: March 05, 2016 - 12:33:17 PM »
Did you just happen to need the one corner and the rest was good? (Just wondering about how you did it because I may do the same and may grab this off of you lol)

Offline Sinatra

  • Jr. Member
  • **
  • Posts: 126
Re: Challenger rear window filler panel, partial
« Reply #2 on: March 05, 2016 - 12:43:26 PM »
Yep.  I had some damage in the very corners of the trunk rail and window frame, and the rest of the panel was perfect.  I didn't see the point of removing good OE metal, so I lopped off the end and made the necessary small patches.