Cuda exhaust needed.

[copper01]

I have headers on my 70 cuda with mufflers and aar tips in front of the tires.  (I prefer the sound of my mopars out the back) but I am planning on leaving it in front of the tires. My qs is does anyone offer a kit from the header collector to the exhaust tip running performance mufflers like flowmasters?   I would like to have the in/out on the one front of the mufflers like the factory aar setup.  Thanks

[Chryco Psycho]

TTI should be able to help you out with different options on pipe size etc but there are very limited choices with entry & exit on the same end

[copper01]

Ill ck with them..Thanks

[dfrazz]

One thing to consider with the in/out on the same side of the muffler is that set up is very restrictive and performance limiting.  I had the AAR set up on mine and took off those mufflers, installed an x-pipe and bullet straight through Magaflows and kept the side exhaust.  Sounds a whole lot better and I gained some TQ and HP, not a ton but ever little bit helps.

[copper01]

That looks nice. 

[Cudakiller70]

One thing to consider with the in/out on the same side of the muffler is that set up is very restrictive and performance limiting.  I had the AAR set up on mine and took off those mufflers, installed an x-pipe and bullet straight through Magaflows and kept the side exhaust.  Sounds a whole lot better and I gained some TQ and HP, not a ton but ever little bit helps.

That is a nice and clean install!  Are you using shorty tube headers or stock exhaust manifolds? Do you have any audio you could post?

[dfrazz]

https://vimeo.com/169435682

Seems to sound louder in person but here you go.

[Cudakiller70]

https://vimeo.com/169435682

Seems to sound louder in person but here you go.

Sounds good, but ya audio recordings aren't like hearing the real thing. Your install is simple and clean I like it. I may make my Cuda an AAR clone someday, may do something very similar. Thank you for taking the time to post it!