Master Cylinder Help

[70 GRAN CPE]

Hello, Does anyone know if a Bendix casting # 2230854 master cylinder will work on a 71 Barracuda Gran Cpe with Power disc front and drum rear, Looks the same as a 3461187 which came on 71 Cudas / Challengers. I bought one on EBAY and its nice I would like to use it on my Gran Cpe. If possible. Any help would be appreciated. Thanks!

[cudabob496]

ebay says it fits, but I'd get one of the new lightweights sold by Summit


http://www.ebay.com/sch/i.html?_from=R40&_trksid=p5468.m570.l1313.TR0.TRC0.H0.TRS5&_nkw=Bendix+casting+%23+2230854+&_sacat=0

[70 GRAN CPE]

Thanks for the suggestion, I want the original look.

[tman]

It must look like this one then?  If so, looks like it will fit.  This one is a new Raybestos unit for power front disc. 

http://www.rockauto.com/info/27/MC36307-11__ra_p.jpg

[70 GRAN CPE]

No this one looks identical to the 3461187 the only thing that is different it has a 1" bore like the original that came on 1970 E bodys.

[HP_Cuda]

Save yourself some time and don't buy the Raybestos MC's, call Dave at Roseville and get the correct one which will work the first time.

Anyone want a brand new Raybestos MC paperweight? 

[Falbz]

Save yourself some time and don't buy the Raybestos MC's, call Dave at Roseville and get the correct one which will work the first time.

Anyone want a brand new Raybestos MC paperweight? 

  I have been through a number of these M/C's - never again. I'd personally stay away from Centric 1970 only style M/C too as I believe they are Raybestos rebranded.  71-74 cores can still be bought at Napa/oreily etc.  Good luck

[wantone]

I had one on my 71 cuda - still have it in my office.    I pulled it off only because I wanted to get a stronger spring to hold the cap on.