I have a 360 almost ready to go, 0 miles located in Idaho, u pay shipping truck freight.
funny Im looking for $4000.00 and you get a motor almost ready to run plus comes with all of these goodies
360 forged 9.0:1 .030 moly rings hv oil/fuel/water pump, 7 qt pan, 484 284 purple shaft, rpm air gap, 750 mech demon, 14x4 k&n, rebuilt 2.02 1.60 J heads, cloyse chain stock rods and crank, all Arp bolts and or studs. mopar windage tray, holley fuel preasure regulator, headman headers, mopar chrome box, mopar hp coil, choke for demon, new motor mounts, prof gone through 727 with 35years+ years of exp. didnt not require a rebuild low miles all new seals. , new pinion snubber, lots more. motor is fully balanced, rebuilt. new lifter, push rods. hoses. remote oil cooler.lokar cable, mini starter,hoses, belts. if your interested email me
challenger73stud@yahoo.comneeds intake machined, I havent because might put on some 308 heads but didn't, needs rockers and head gaskets/intake/hardened oil pump shaft thats about it. around $5500 invested