Author Topic: Fuel line question  (Read 2217 times)

Offline mopar jack

  • Full Member
  • ***
  • Posts: 566
Re: Fuel line question
« Reply #15 on: August 24, 2016 - 12:35:24 PM »
If you have factory installed fuel lines they should line up close to their install position. If not this is where the vapor separator is located.




Offline Wadmin1021

  • Jr. Member
  • **
  • Posts: 135
Re: Fuel line question
« Reply #16 on: August 24, 2016 - 01:09:55 PM »
The return line goes to the bottom of the vapor separator if it is an oem style. I use after market separators and the 1/4 return line goes on top.

Thank you Mopar Jack!


Sent from my iPhone using Tapatalk
https://youtu.be/OEKt5K71CDM

A couple that plays together, stays together!

'71 Plymouth 'Cuda named Claudia w/ 440 4-barrel and TF AT

Offline Wadmin1021

  • Jr. Member
  • **
  • Posts: 135
Re: Fuel line question
« Reply #17 on: August 24, 2016 - 01:11:40 PM »
AS I said earlier

anlauto - why you giving me such a hard time!?



Sent from my iPhone using Tapatalk
https://youtu.be/OEKt5K71CDM

A couple that plays together, stays together!

'71 Plymouth 'Cuda named Claudia w/ 440 4-barrel and TF AT

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: Fuel line question
« Reply #18 on: August 24, 2016 - 02:43:16 PM »
Not giving you a hard time, I was agreeing with the poster above, Mopar Jack, that the 1/4 return hooks to the vapour separator
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com