Author Topic: A/C Line Question (Read 1107 times)

jmartin99 · « **on:** November 08, 2016 - 09:23:54 PM »

I am putting together a '72 Challenger for a friend and I have all of the original A/C lines but the aluminum lines are very dirty. What is the best way to make them look good again? Media blast? Steel wool?

Thanks!

Jeff

anlauto · « **Reply #1 on:** November 08, 2016 - 09:30:03 PM »

Depends on the level of restoration....You can wire wheel them, or media blast and paint the silver and black or you can send them out to be re-plated...

jmartin99 · « **Reply #2 on:** November 08, 2016 - 09:34:39 PM »

If I media blast, what type of media would you recommend using?

Thanks!

Jeff

twalker · « **Reply #3 on:** November 08, 2016 - 09:40:06 PM »

Steel wool / SOS pad

Sent from my iPad using Tapatalk

twalker · « **Reply #4 on:** November 08, 2016 - 09:40:51 PM »

If there is a lot of paint on them, brake fluid

Sent from my iPad using Tapatalk

anlauto · « **Reply #5 on:** November 08, 2016 - 09:44:29 PM »

glass bead....make sure to cap them off and really clean them out afterwards

reborn73 · « **Reply #6 on:** November 08, 2016 - 09:46:29 PM »

I wire wheeled mine. You can see two of them in this pic. They were in pretty good shape to start with though

jmartin99 · « **Reply #7 on:** November 12, 2016 - 12:35:54 AM »

Reborn73,
Could you possibly post a pic or two of the two A/C lines that attach to the condenser? I believe I have the correct lines but when I attempt to connect them to the fittings on the compressor they do not seem to fit as easy as they should.

Thanks!

Jeff

Author Topic: A/C Line Question (Read 1107 times)

jmartin99

A/C Line Question

anlauto

Re: A/C Line Question

jmartin99

Re: A/C Line Question

twalker

Re: A/C Line Question

twalker

Re: A/C Line Question

anlauto

Re: A/C Line Question

reborn73

Re: A/C Line Question

jmartin99

Re: A/C Line Question