Author Topic: fitech efi  (Read 3533 times)

Offline Katfish

  • Resident
  • *****
  • Posts: 3733
  • 70 Challenger
Re: fitech efi
« Reply #15 on: November 27, 2016 - 11:19:36 PM »
I've heard good reports about the McRobb unit...

http://www.robbmcperformance.com/products/powersurge.html


Not familiar with this?  Does it mean you don't need a new tank with in-tank fuel pump or return lines?




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: fitech efi
« Reply #16 on: November 28, 2016 - 12:02:16 AM »
Not familiar with this?  Does it mean you don't need a new tank with in-tank fuel pump or return lines?

That is exactly what it means  :bigsmile: opens a lot of doors.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline polarbear123

  • Jr. Member
  • **
  • Posts: 407
Re: fitech efi
« Reply #17 on: November 28, 2016 - 10:49:12 AM »
Anybody have pictures of engine bay after install?

Offline cudabob496

  • Sr. Resident
  • ******
  • Posts: 8024
Re: fitech efi
« Reply #18 on: November 28, 2016 - 02:38:58 PM »
does the Robb unit give the fuel pressure needed for the  FItech 800 hp version?
72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

2011 Kawasaki Z1000

Offline polarbear123

  • Jr. Member
  • **
  • Posts: 407
Re: fitech efi
« Reply #19 on: November 28, 2016 - 02:53:10 PM »
There are 2 models 500 and 1000 hp.

Offline dfrazz

  • 1970 Cuda - 1968 Charger
  • Resident
  • *****
  • Posts: 4070
Re: fitech efi
« Reply #20 on: November 28, 2016 - 03:03:25 PM »
So not only is there a concern with these "remote fuel tanks" functioning properly, but is anyone else concerned about putting a can a fuel in a hot engine bay?

Offline cudabob496

  • Sr. Resident
  • ******
  • Posts: 8024
Re: fitech efi
« Reply #21 on: November 28, 2016 - 04:15:50 PM »
So not only is there a concern with these "remote fuel tanks" functioning properly, but is anyone else concerned about putting a can a fuel in a hot engine bay?

I suppose you could look at both fuel bowls on a carb as cans of fuel?
72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

2011 Kawasaki Z1000

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: fitech efi
« Reply #22 on: November 28, 2016 - 10:45:47 PM »
Guess it depends on where you mount it; if it is back near the firewall I do not think it would be an issue, however if you mounted it in the grille it might be..  :bigsmile: I think it would be fine and I would not hesitate to use one.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)