News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 472 Hemi question  (Read 871 times)

    Offline dana60

    • Jr. Member
    • **
    • Posts: 119
    472 Hemi question
    « on: July 21, 2017 - 11:24:24 PM »
    I bought a 472 Hemi for my 70 CUDA. I heard it will be very difficult to start after you turn it off after driving it  ( being that it's hot ) ? Is there a fix for this ? Fuel injection ? Or ....????? Thx


     :wavingflag:
    Logged


    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: 472 Hemi question
    « Reply #1 on: July 22, 2017 - 01:34:02 AM »
    there is an easy fix for any hot engine that has trouble starting.
    usually involves a heat shield on the carb, and phenolic spacer,
    and insulation on the fuel lines. Search this site for a lot of discussion
    on the issue. Good luck!
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000

    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: 472 Hemi question
    « Reply #2 on: July 22, 2017 - 03:42:45 AM »
    also, engine needs to be in tune, with carb properly adjusted,
    and correct timing. Engine must be well grounded.
    « Last Edit: July 22, 2017 - 04:11:52 PM by cudabob496 »
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000
    Pages: [1]
    « previous next »