Author Topic: Pentastar Placement (Read 2670 times)

Claudia · « **on:** May 05, 2015 - 11:23:54 AM »

Looking for the measurements for the Pentastar location on the front fender for a '71 Cuda?

anlauto · « **Reply #1 on:** May 05, 2015 - 12:21:27 PM »

Same as 70 Cuda

Claudia · « **Reply #2 on:** May 05, 2015 - 02:43:15 PM »

anlauto - Thank you!

dpcd67 · « **Reply #3 on:** May 09, 2015 - 11:14:41 PM »

Was 71 the last year for this? My 67 WM300 has one. My 73 Barracuda does not. Did my 71 Duster have one? I can't remember that far back.

Bluemonster71RT · « **Reply #4 on:** May 10, 2015 - 12:51:18 PM »

Does this happen to be the same for the Challenger?

polarbear123 · « **Reply #5 on:** August 10, 2017 - 02:46:10 PM »

What size bit is #32 and #15.

Thanks

73440 · « **Reply #6 on:** August 10, 2017 - 03:43:22 PM »

4 speed fish · « **Reply #7 on:** August 11, 2017 - 02:44:44 PM »

I removed the tabs on the back and used some adhesive to attach it.

polarbear123 · « **Reply #8 on:** August 11, 2017 - 02:56:50 PM »

Good idea did you use 3M.

4 speed fish · « **Reply #9 on:** August 12, 2017 - 10:50:02 AM »

I think I used a small amount of silicone.

twalker · « **Reply #10 on:** August 12, 2017 - 04:42:47 PM »

I removed the tabs on the back and used some adhesive to attach it.

Yeah that's what I did, didn't want to drill holes

Sent from my iPhone using Tapatalk

70chall440 · « **Reply #11 on:** August 14, 2017 - 12:52:37 PM »

I removed the tabs on the back and used some adhesive to attach it.

small piece of 3M tape works great!

polarbear123 · « **Reply #12 on:** August 14, 2017 - 02:07:22 PM »

I used 3M tape. Thanks for the help.