Author Topic: emergency brake cable routing  (Read 1575 times)

Offline Barracuda73

  • Jr. Member
  • **
  • Posts: 15
emergency brake cable routing
« on: September 07, 2017 - 06:38:11 PM »
I installed 2X3 subframe connectors through the floor on a 73 barracuda. The car originally had emergency brake cables with an intermediate cable. Can emergency brake cables without an intermediate cable be installed on a 73 barracuda? I was trying to find pictures of the emergency brake cable setup without an intermediate to see if they would interfere with subframe connectors.




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: emergency brake cable routing
« Reply #1 on: September 08, 2017 - 12:57:26 AM »
I have SFC on my Cuda and am running a Lokar E brake cable, it runs on the outside of the connectors (between the connectors and rocker panel).
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline Barracuda73

  • Jr. Member
  • **
  • Posts: 15
Re: emergency brake cable routing
« Reply #2 on: September 09, 2017 - 10:12:39 AM »
I didn't know Lakar car made emergency brake cables.  Is this the kit you used EC-80FU ?

Sent from my DROID BIONIC using Tapatalk


Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: emergency brake cable routing
« Reply #3 on: September 09, 2017 - 10:53:11 PM »
That looks like it. I had to adapt it to the original cable coming from the pedal. Not hard, just takes some thinking.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)