Author Topic: Radiator Support (Read 1221 times)

money pit · « **on:** October 19, 2017 - 06:41:24 PM »

Is the radiator support for a 70 six cylinder Barracuda different from a V8 car? I'm trying to in stall a V8 radiator in a Barracuda that was a six cylinder. I noticed tha radiator support is not flat, which makes the radiator difficult to install. Any suggestions for mounting the radiator. Thanks

Beekeeper · « **Reply #1 on:** October 20, 2017 - 12:08:44 AM »

My understanding is that they were they same but the opening width is wider when the v8 cars had 26" radiators. The change in width can be fixed by swapping out the driver side metal support. It might help if you put up a few pictures.

E-Body Products · « **Reply #2 on:** November 13, 2017 - 06:23:17 AM »

You will have to change the radiator support to 26�. Sherman sells the support. I think you need 160-49BR. I also think it�s the passenger side brace that needs modified. The drivers side is the same on slant 6 and V8 cars. I hope you haven�t already painted and assembled your car.

Sent from my iPhone using Tapatalk

ted · « **Reply #3 on:** November 18, 2017 - 03:36:25 AM »

not all v8 cars had the 26 inch radiator

E-Body Products · « **Reply #4 on:** November 18, 2017 - 08:16:38 AM »

Quote from: ted on November 18, 2017 - 03:36:25 AM

not all v8 cars had the 26 inch radiator

I agree, but it seems he is trying to install a 26� radiator. You probably offer the best solution, get a smaller radiator that fits.

Sent from my iPhone using Tapatalk

Author Topic: Radiator Support (Read 1221 times)

money pit

Radiator Support

Beekeeper

Re: Radiator Support

E-Body Products

Radiator Support

ted

Re: Radiator Support

E-Body Products

Re: Radiator Support