Author Topic: 1973 dodge challenger project  (Read 8303 times)

Offline penski61

  • Jr. Member
  • **
  • Posts: 11
1973 dodge challenger project
« on: December 01, 2017 - 09:33:39 PM »
73 challenger located in Mesa , Az
I have just about everything to put the car back together except for the following - upper and lower arms , spindles and brakes , rear leaf springs , front spring mounts for leaf springs and front windshield  . I can put a 8-3/4 under it with with new shoes and springs for  brakes but 3rd member would need to be swapped out its open diff with a 2.93 gear ratio from what I was told and does not have a yoke. with the 8-3/4 id like to get $4500 with stock k member
or I can sell it with the dana 60 and 4 link for $6000

plan was to do a modern hemi swap , transmission tunnel has been opened up .
i do have a 6.1 hemi and tremec 6060 6 speed i can sell with this along with a partial gerst eliminator coil over conversion kit
total price for everything would be 11k
https://phoenix.craigslist.org/evl/cto/d/1973-dodge-challenger-project/6399356076.html
« Last Edit: December 01, 2017 - 09:36:45 PM by penski61 »