440 Aluminum Heads

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 440 Aluminum Heads  (Read 1230 times)

    Offline RCCDrew

    • Sr. Member
    • ****
    • Posts: 1380
    440 Aluminum Heads
    « on: February 01, 2018 - 10:08:46 PM »
    I’m building a low budget .040 over 440 for a Charger project. 9.5 compression, mild Lunati Voodoo cam. I’m about to pull the trigger on some low buck Aluminum heads. Anyone have any opinions on Promaxx vs Edelbrock E Street vs Sidewinder heads?
    Logged


    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: 440 Aluminum Heads
    « Reply #1 on: February 04, 2018 - 12:36:05 AM »
    gonna check with 440source.com?
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000

    Offline RCCDrew

    • Sr. Member
    • ****
    • Posts: 1380
    Re: 440 Aluminum Heads
    « Reply #2 on: February 04, 2018 - 09:16:05 AM »
    I looked. They are on sale for $500 each which is great. I’m leaning toward the ez street heads right now because of the smaller combustion chamber.
    Logged

    Offline DocMel

    • Full Member
    • ***
    • Posts: 828
    Re: 440 Aluminum Heads
    « Reply #3 on: February 05, 2018 - 03:47:42 PM »
    440 source aluminum heads for me.  Had them about 2 years now, absolutely no probs here
    Logged
    Pages: [1]
    « previous next »