Rear sway bar hardware for a 1970 Cuda

[soccernut43]

Anybody know where I could get the hardware for a 1970 rear sway bar for a 1970 Cuda?  Autozone may have the bushings but the bolts seem to be very difficult to find.  Thanks!!!

[70chall440]

http://www.firmfeel.com/e_body_mopar_rear_sway_bar.html

[soccernut43]

The only thing is I don't need the sway bar or the mounts.  Just the bushings and bolts.

[1 Wild R/T]

You won't find a listing for parts for a rear bar on a E body but the end links or a E body rear are originally 68-70 B body front pieces...   However if you want the OE design with nuts on each end you'll have to source originals cause the aftermarket replaces it with a normal bolt like everyone else uses.....

[JayBee]

Here's a picture I saved from years ago, hope it helps. I was able to find something very similar through my old workplace, you might get lucky locally too.

[soccernut43]

I'm going to have to check out the Roadrunner front sway bar parts.  Only problem is I measured the diameter of my rear sway bar and it came out 0.74 inches.  Little less then 3/4 of an inch. 

Thanks for all the info guys. More then I had before I posted. 

[djw383]

Firm Feel has them


Sent from my iPhone using Tapatalk