Author Topic: 70 cuda headliner trim  (Read 1722 times)

Offline norcalmike

  • Jr. Member
  • **
  • Posts: 3
70 cuda headliner trim
« on: June 30, 2018 - 03:44:08 PM »
i need the front corner pieces for the headliner




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: 70 cuda headliner trim
« Reply #1 on: July 01, 2018 - 01:06:44 AM »
Not sure what you are talking about, do you mean something that goes over the headliner? If so, you A pillar cover (x 2, one on each side) and the 2 metal trim strips are what cover it).
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline norcalmike

  • Jr. Member
  • **
  • Posts: 3
Re: 70 cuda headliner trim
« Reply #2 on: July 03, 2018 - 09:45:30 AM »
The car was already torn down so I was trying to piece it together, I have the a pillar covers... is there anything else required for the corner areas? I have the metal pieces for over the door.

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: 70 cuda headliner trim
« Reply #3 on: July 03, 2018 - 11:46:25 AM »
No, the A pillar covers take car of that, they connect to the metal U channel trim over the windows and then there is a metal piece across the top of the windshield (I believe its 2 pieces). I will look at my car later.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)