Author Topic: Reproduction tag?  (Read 1259 times)

Offline mrwfp

  • Jr. Member
  • **
  • Posts: 139
Reproduction tag?
« on: June 06, 2022 - 12:49:55 PM »
Here is a link to a Panther Pink Challenger listed in the upcoming Mecum auction.  The write up states, "Reproduction fender tag with current options, color and trim codes affixed."  What good is a tag if it is faked to match what the owner/restorer made the car into?  The tag isn't readable in any of the pictures and I don't know if they did this on the tag, but wouldn't changing an "N" code to a "V" code be altering the VIN?  I know the VIN shows up in other locations but the tag is what most people look at first.

https://www.mecum.com/lots/TJ0622-508208/1970-dodge-challenger-rt/




Offline jimynick

  • Resident
  • *****
  • Posts: 4512
Re: Reproduction tag?
« Reply #1 on: June 06, 2022 - 10:48:03 PM »
Can't argue with your logic. It'll be interesting to see where it goes.  :cheers:

Offline MoparCarGuy

  • Newbie
  • *
  • Posts: 1
Re: Reproduction tag?
« Reply #2 on: October 16, 2022 - 01:36:43 PM »
The Mecum posting must have changed.
It says,
  • Build documentation
  • Reproduction fender tag installed
  • Factory original Fender tag included

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: Reproduction tag?
« Reply #3 on: October 17, 2022 - 01:23:05 PM »
There are a lot more "reproduction" tags out there than you would like to believe. Many of the high end builds have them but do not admit to it or they have the original tag which is rusty and damaged so they make a nice new one to put onto the car.

Everyone can have their own opinions on the tags, personally I feel that if the tag represents what's on the car then so be it. The VIN contains the model, year and engine so those cannot be "faked" and I completely understand that you can make a tag with a pile of options that the car did not originally have, however if those options are on the car and installed/applied correctly then it is what it is (proverbial walks like a duck scenario).

Perhaps the more salient point is this, if someone were to buy a car which the tag matched the car and everything was installed as it was supposed to be how would you know any different unless some documentation or a previous owner came forward disputing the current configuration.

This tag deal is a direct result of the A hole "investors" getting to the hobby along with the greedy ass auction houses. Back in the day no one gave two craps about a fender tag, they bought a car for what it was then, not what it "should" have been. However, so much has been made of the tag issue that now people with "lesser" cars feel that they need a tag on the car or be ridiculed for not having one.

Personally I don't have any issue with a repo tag or even added options on a car for that matter so long as it isn't a hack job. Buy the car for what it is not what it is supposed to be. Bottom line though is that unless someone can prove otherwise the tag on the car is all you have to go from. Since I don't buy 6 figure cars this is not a problem in my world...
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)