Author Topic: 833 OD info needed  (Read 827 times)

Offline A110235

  • Jr. Member
  • **
  • Posts: 414
  • '71 Challenger JH23G1B
833 OD info needed
« on: September 29, 2005 - 09:06:06 PM »
While on my way to work I found a '77 dodge ram 200 truck.  It has a V8 and the OD 4 speed.  I would like to get the complete engine and trans out of it to put in my challenger, but I am not sure about one thing.  The truck is a 4X4 and I thought that I remember reading that the tran from the 4X4 won't work.  Is this right?  Will the trans work at all, or is the bell housing the problem?



Nashville, TN         Member since October 09, 2004




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 833 OD info needed
« Reply #1 on: September 30, 2005 - 01:21:01 AM »
I have never seen an OD 833 with a transfer case attached , it is morelikely to be the a 435 tranny & not an OD & no it will not fit into your car

Challenger - You`ll wish You Hadn`t

Offline A110235

  • Jr. Member
  • **
  • Posts: 414
  • '71 Challenger JH23G1B
Re: 833 OD info needed
« Reply #2 on: September 30, 2005 - 06:23:37 PM »
Crap!  The truck was surrounded by tall weeds and I couldn't get a good look underneath.   I am positive that the shift handle pattern was like this:


     R    1     3
     |_ _| __ |
           |     |
           2    OD

Does the 435 look like the 833?  Is there a way to tell them apart?



Nashville, TN         Member since October 09, 2004

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 833 OD info needed
« Reply #3 on: October 01, 2005 - 02:34:26 AM »
the shift knob probably threads onto the 435 shift lever , the 435 is totlly differnt to an 833 , the 435 has an internal top rail shifter while  the 833 has the external hurst shifter , if it has a transfer case it isn`t an 833

Challenger - You`ll wish You Hadn`t