How far should I tear down my 340....

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: How far should I tear down my 340....  (Read 1092 times)

    Offline ike1970RT

    • Jr. Member
    • **
    • Posts: 29
    How far should I tear down my 340....
    « on: May 25, 2006 - 01:09:21 PM »
    My 70 challenger is at the body shop getting a facelift, and I want to get the Engine ready while the body is away. It has been on the engine stand for a few years. I took it apart , and it looks good, but I am being told the best way is to completely rip it down, give it an acid bath, and put her back together. While Im at it I should also put a new set of rings in. Keep in mind that this engine was completely rebuilt years ago and has about 10-12 hours on it. It never got broken in before I ripped the engine out again to have the body done over. How far should I go? I promise to put some pictures in when I get some... Thanks for any input. I could really use your opinions....Ike
    Logged


    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: How far should I tear down my 340....
    « Reply #1 on: May 25, 2006 - 02:28:28 PM »
    If there isn't any rust on the cylinders, cover all of the holes, put in brass freeze plugs, freshen all of it's paint, then get it ready to bolt back in.  It sounds like it's already rebuilt.   

    While it's on the stand, pull all the plugs, put in fresh oil and filter, prime the pump by hand till you get oil pressure.
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline ESGEE

    • Sr. Member
    • ****
    • Posts: 1448
    • 1970 Challenger RT/SE
      • SG´s site
    Re: How far should I tear down my 340....
    « Reply #2 on: May 25, 2006 - 02:29:36 PM »
    I would just clean it and go, since its just 10-12 hours since rebuilt....
    Logged
    70 Challenger RT/SE(Looking for 383 Magnum N0B196875)
    70 Challenger RT/SE(Looking for 383 Magnum N0B115166)
    70 Challenger SE(RT/SE clone)
    69 Charger RT/SE 4speed Trackpac
    70 Charger 500

    Offline Mopar73340

    • Sr. Member
    • ****
    • Posts: 1130
    Re: How far should I tear down my 340....
    « Reply #3 on: May 25, 2006 - 06:52:17 PM »
    Quote from: shelbydogg on May 25, 2006 - 02:28:28 PM
    If there isn't any rust on the cylinders, cover all of the holes, put in brass freeze plugs, freshen all of it's paint, then get it ready to bolt back in.  It sounds like it's already rebuilt.   

    While it's on the stand, pull all the plugs, put in fresh oil and filter, prime the pump by hand till you get oil pressure.

     :iagree:
    Logged
    73-Challenger 340 727/GearVendors Auto
    73-Challenger 408 Pistol-Grip 5-speed

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: How far should I tear down my 340....
    « Reply #4 on: May 27, 2006 - 05:46:05 AM »
    with only 10 hrs on it I would leave the rings & pistons in the bores as is
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »