Two weeks ago, I finished repairing the tail panel by welding new metal in. WHAT A PAIN IN THE A$$ around the license plate bucket! Then I started to do some initial body work on the tail panel and the right side of my car. The right rear quarter had been replace by who ever had my car before me. They did a pretty good job, but I still had to put a coat of "bondo" on where the seam is. There are a just a couple of low spots left to get there. The door and front fender, still need a lot of work, but as you can tell, I sprayed a coat of primer/sealer on the entire side to prevent rust. Several places I was working on got back down to bare metal. As far as metal work, I only have the driver's side rocker and a patch to do for the lower, left rear quarter. Needless to say, I can't wait to get that done and dedicate the winter to getting the body perfectly straight.
