Author Topic: 440 fuel injection  (Read 1434 times)

Offline Lovemy440

  • Jr. Member
  • **
  • Posts: 193
  • mopar or no car
440 fuel injection
« on: August 17, 2004 - 04:52:09 PM »
I am trying to find a fuel injection system for a 440 with a twin turbo setup
what places would sell one that can handle that much hp??
Nos is neat,
Injection hard to beat
But when it"s time to get goin
I'd rather be blown




Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: 440 fuel injection
« Reply #1 on: August 17, 2004 - 05:33:21 PM »
I haven't looked, but have you tried the usual suspects like summitracing.com, and jegs.com ?

  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Lovemy440

  • Jr. Member
  • **
  • Posts: 193
  • mopar or no car
Re: 440 fuel injection
« Reply #2 on: August 17, 2004 - 06:58:53 PM »
yes none are rated for anything over 1000 hp
Nos is neat,
Injection hard to beat
But when it"s time to get goin
I'd rather be blown

Offline Autophile

  • Jr. Member
  • **
  • Posts: 339
  • Kowalski... and the keys to a sawed-off weekend!
Re: 440 fuel injection
« Reply #3 on: August 17, 2004 - 11:46:29 PM »
You're gonna have to piece it together.  Accell, Haltech, MSD, Indy Cylinder Heads, Enderle, Culver... these vendors would be a good place to start.
1971 Cuda, black/black, 419 cu. in. 3G Hemi with twin turbos (build in progress), AlterKtion, Wilwood 12.19" disks, billet Rallye wheels

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 440 fuel injection
« Reply #4 on: August 18, 2004 - 01:18:57 AM »
Megasquirt , SDSEFI or Rance
 I have been looking into doing the same , I will build my own fuel system using a mismatch of pumps , injectors & & a large trottle body
 looking at SDSEFI as they are about a mile from me or I may try to usea ford computor & eliminate the troblesome Map sensor
« Last Edit: November 29, 2005 - 11:54:29 PM by Chryco Psycho »

Challenger - You`ll wish You Hadn`t

Offline Bamakx

  • Jr. Member
  • **
  • Posts: 33
Re: 440 fuel injection
« Reply #5 on: November 29, 2005 - 10:24:30 AM »
I am going to efi and twin turbo my Challenger.  Going to stroke to 512ci and try to get 1000hp at 15 psi (should not be a problem).  Call these guys they can do about anything. http://www.force-efi.com/machefi.htm
73 Challenger 440 727 with Over drive

Offline turbocuda

  • Jr. Member
  • **
  • Posts: 16
Re: 440 fuel injection
« Reply #6 on: December 19, 2005 - 06:26:40 PM »
accel dfi w/ wideband (from force)w/ sbc wiring harness
72 lb siemens low impedence...150's soon
Aeromotive eliminator pump
mallory efi regulator
home fabbed victor intake
home fabbed rails
75mm edelbrock throttlebody
home fabbed 3 1/2 x 3 intake adapter....

This is mostly what makes up my injection setup.....



Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 440 fuel injection
« Reply #7 on: December 20, 2005 - 12:30:40 AM »
Nice system TC  :ylsuper:

Challenger - You`ll wish You Hadn`t