Author Topic: Will this work?  (Read 1437 times)

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Will this work?
« on: January 19, 2006 - 10:44:46 AM »
I found this on Craigslist and was wondering if it'll be the right part(s) for a 70 Hemi.

                 

                              http://www.craigslist.org/eby/pts/126587031.html
Mike, Fremont, CA.





Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Will this work?
« Reply #1 on: January 19, 2006 - 12:36:59 PM »
on an E body I would use a clutch fan , not aa fixed fan like this one
 Yes it would work depending on diameter the big Chryslers had a larger diameter fan maybe 21" that will not work with a shroud

Challenger - You`ll wish You Hadn`t

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Will this work?
« Reply #2 on: January 19, 2006 - 10:32:46 PM »
I wasn't sure whether a clutch could be put on that later. If not, I would rather hunt down one that has it.
Mike, Fremont, CA.


Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Will this work?
« Reply #3 on: January 19, 2006 - 10:40:30 PM »
clutch fans are different & ytou cannot add a clutch to that fan

Challenger - You`ll wish You Hadn`t

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Will this work?
« Reply #4 on: January 19, 2006 - 10:46:13 PM »
Thanks CP.  :thumbsup:
Mike, Fremont, CA.


Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Will this work?
« Reply #5 on: January 19, 2006 - 10:48:08 PM »
No Prob TC

Challenger - You`ll wish You Hadn`t