Author Topic: Torsion bar identification please.....  (Read 1244 times)

Offline gomangoRT/SE

  • Full Member
  • ***
  • Posts: 594
Torsion bar identification please.....
« on: January 25, 2006 - 09:45:10 PM »
One of the torsion bars read 778R and 379 on one end.   The opposite end also says 778R but also says U N E.   

The other torsion bar says 779L and 389 on one end.......and 779L and U N X on the opposite end..
3 questions, does the odd number (in this case 779) go on the drivers side and the even number (778) go on the passengers side?    Or do I have it backwards.

Secondly does one end of the torsion bar specifically face the front vs the rear.

thirdly....   Can anyone identify the diameter of this torsion bar based on the above numbers.   I guess i could mike it.





Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Torsion bar identification please.....
« Reply #1 on: January 26, 2006 - 12:24:19 AM »
they are the 340/383 bars & will be smaller then the .92 R/T bars . probably .88"
 Odd # is always the left side of the car [drivers side], even is right
 I generally install them with the 778/9 r /l to the rear

Challenger - You`ll wish You Hadn`t