News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 360 carburation  (Read 747 times)

    Offline basement

    • Jr. Member
    • **
    • Posts: 270
    360 carburation
    « on: June 14, 2006 - 07:53:50 AM »
    So I picked up a jet kit to dial in my Edelbrock carb and in reading the carb manual i found it is a 600cfm. Am i suffocating the 360 with this small a carburator? It is a completely stock 360 motor, headers, 4-speed.
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: 360 carburation
    « Reply #1 on: June 14, 2006 - 08:33:18 AM »
    in my opinion yes , while most 360 came from the factory with just a Holley 2 bbl they can use more of course ihave never been a fan of the Eddy / Carter afb
    Logged

    Challenger - You`ll wish You Hadn`t

    KTO

    • Guest
    Re: 360 carburation
    « Reply #2 on: June 14, 2006 - 01:40:01 PM »
    It all depends how high of rpm you're running to.

    I'd say you're fine below 6000rpm... choking past that.
    « Last Edit: June 14, 2006 - 01:42:07 PM by KTO »
    Logged

    Offline Rob C

    • Jr. Member
    • **
    • Posts: 191
    Re: 360 carburation
    « Reply #3 on: June 14, 2006 - 07:48:34 PM »
    600 is fine. When it comes to what size is ideal or not enuff, the amnifold should be hhoked up to a gauge and see what the readings are.
    A pressure of 1.5 is to high for best performance and a larger carb can be used.
    The difference in a 600 to 750 on some engines produce on 5-7 hp more.
    So is it worth the expense?
    Logged
    '73 Cuda, 360, 4psd & 4.10's
    '79 Dodge Magnum, 360, 727, 9-1/4 W/3.55's
    Pages: [1]
    « previous next »