You need to remove the entire bezel. Pull the turn signal wire connectors apart from the main wiring harness, then undo the 2 nuts on the back side of the bezel backing plate. That releases the whole unit from the fender. Pull the whole bezel out, on the backside are 2 screws holding the plastic lens in place. Unscrew them, pop the lens, and you've got access to the light bulb. Kind of a pain,but that's how it is. If you do break the wiring that connects to the bezel,don't worry. Repops are available. Just saw some on e-bay for like $29.00 or so. Hope this helps!
Topic: Newbie question-how to change front side marker bulbs? (Read 1226 times)
