News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: choke wire position  (Read 622 times)

    Offline MoparMatt383

    • Jr. Member
    • **
    • Posts: 388
    • Member as of March 2004
    choke wire position
    « on: June 05, 2006 - 11:41:25 PM »
    I have an edelbrock performer carb with the electric choke on my 340 in my 73 barracuda.  Just wondering where do you guys have your choke hot wire ran to.  Right now I have mine hooked up to the coil, which I know is wrong but its just temporary till I get the new motor tuned right.  Any thoughts?

    Matt
    Logged
    Too many projects and nothing gets done.


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: choke wire position
    « Reply #1 on: June 06, 2006 - 12:24:17 AM »
    the dark blue wire thaat goes to the ballast resister is the wire you need to tap into for 12v switched power
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Mopar73340

    • Sr. Member
    • ****
    • Posts: 1130
    Re: choke wire position
    « Reply #2 on: June 06, 2006 - 03:58:53 PM »
    Being that your car is a 73, there should already be a blue wire running along the passenger side valve cover that should have a female connector on it that stops in the original choke area to feed the original choke. It has the 12 volts you need also.
    Logged
    73-Challenger 340 727/GearVendors Auto
    73-Challenger 408 Pistol-Grip 5-speed

    Offline MoparMatt383

    • Jr. Member
    • **
    • Posts: 388
    • Member as of March 2004
    Re: choke wire position
    « Reply #3 on: June 07, 2006 - 03:05:31 PM »
    Ok I know the wire that you are talking about.   :thumbsup:

    Matt
    Logged
    Too many projects and nothing gets done.
    Pages: [1]
    « previous next »