Author Topic: 318 - 360 motor mounts. what do i need? (Read 761 times)

GoodysGotaCuda · « **on:** August 06, 2006 - 02:42:06 PM »

I have a original 318 barracuda. i will be putting in a LA 360. i currently have a solid moroso drivers side motor mount, and a stock mount with a replacement insert on the passenger side. From what i understand is that the 318 mount can be shimmed(washers) and work just fine? Anyone have any pictures? my moroso mount doesnt specify 318 or 340/360, but bolts right in.

thanks!

422STROKER · « **Reply #1 on:** August 06, 2006 - 02:44:40 PM »

I've seen it done w/alternator shims cut to size but can't find the pics right now.

Any one else as I could use a reference also.

Tom

Chryco Psycho · « **Reply #2 on:** August 06, 2006 - 03:35:52 PM »

just the left engine mount is different , the mount that bolts to the block ears

wiging19 · « **Reply #3 on:** August 06, 2006 - 04:43:25 PM »

I did the same thing with my car. As usual Psycho is correct. There are a few places that sell the part your looking for here is one:

http://www.engine-swaps.com/

good luck.

Author Topic: 318 - 360 motor mounts. what do i need? (Read 761 times)

GoodysGotaCuda

318 - 360 motor mounts. what do i need?

422STROKER

Re: 318 - 360 motor mounts. what do i need?

Chryco Psycho

Re: 318 - 360 motor mounts. what do i need?

wiging19

Re: 318 - 360 motor mounts. what do i need?