News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Dash removal  (Read 1763 times)

    Offline bullfrawgs

    • Jr. Member
    • **
    • Posts: 3
    • I'm a llama!
    Dash removal
    « on: June 27, 2003 - 10:08:09 AM »
    Is it possible to pull out the entire dash assembly as one piece? I want to leave all wires and guages attached. It is a non ac 73 challenger. I need to get to the cowl vents and fix them and also got some minor rust to fix.  What reference materials would show removal and installation?
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re:Dash removal
    « Reply #1 on: June 27, 2003 - 02:21:20 PM »
    Yes it is relatively easy to do , there are 6 bolts , 4 in the defroster vents & 1 at each end by the kick panel , you also need to pull the firewall plug , disconnect the vent cables & heater cables & drop the column as the dash is pinched between the column & pedal support
    Logged

    Challenger - You`ll wish You Hadn`t

    lemonboy69

    • Guest
    Re:Dash removal
    « Reply #2 on: June 27, 2003 - 11:48:24 PM »

    It's really hard to get to the ones in the defroster vents with the front windshield in... I don't know if you want to go through the effort of pulling it... but from experience... with it out... those 4 bolts are sooooo easy to get to... ::) Good luck!

    LB
    Logged
    Pages: [1]
    « previous next »