Author Topic: Any idea why guages wouldn't work after a stereo install?  (Read 1012 times)

Offline Grec

  • The '73 Chrysler should have made...
  • Full Member
  • ***
  • Posts: 974
Any idea why guages wouldn't work after a stereo install?
« on: October 13, 2006 - 04:50:10 PM »
Just picked up my 73 Chally after getting a deck, amp and 6x9s installed.

On my way home I noticed that my gas and tempurature guages are dead.

Any idea what they could have done to cause this? Amp guage is still working, by-the-way.

1973 Challenger Rallye
- 440 Six Pack
- A833 4 Speed, 18 Spline
- FE5 Rallye Red on Black




Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Any idea why guages wouldn't work after a stereo install?
« Reply #1 on: October 13, 2006 - 05:12:19 PM »


Could it be something like drawing amps/voltage away from your cluster? Stereo units can take a lot of juice......


 :2cents: :dunno:
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Any idea why guages wouldn't work after a stereo install?
« Reply #2 on: October 13, 2006 - 05:15:27 PM »
fuse #6 goes to both fuel, temp. & oil guage via the voltage limiter, soo check/ replace the fuse, make sure everything is plugged in good and if all else fails replace the voltage limiter on the back of the insrument panel.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Any idea why guages wouldn't work after a stereo install?
« Reply #3 on: October 13, 2006 - 05:52:51 PM »
fuse #6 goes to both fuel, temp. & oil guage via the voltage limiter, soo check/ replace the fuse, make sure everything is plugged in good and if all else fails replace the voltage limiter on the back of the insrument panel.

I agree here, I made the mistake of groundin the head unit on a car to the guage cluster(same screw as the limiter) and the limiter went south quickly.

Good luck
Tom :2thumbs:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline Grec

  • The '73 Chrysler should have made...
  • Full Member
  • ***
  • Posts: 974
Re: Any idea why guages wouldn't work after a stereo install?
« Reply #4 on: October 13, 2006 - 06:54:54 PM »
Sounds good.

Thanks, guys.
1973 Challenger Rallye
- 440 Six Pack
- A833 4 Speed, 18 Spline
- FE5 Rallye Red on Black