Author Topic: How do you tell if clevite bearings are std or otherwise...no size on bearing (Read 2539 times)

67Vette427 · « **on:** September 13, 2006 - 11:07:49 PM »

I have a 69 440 forged steel crank I'm going to sell. I pulled the bearings and the all looked pretty good. They just have the Clevite part # but they don't say the size. If they are not marked, are they standard?

Thanks

Chryco Psycho · « **Reply #1 on:** September 13, 2006 - 11:53:52 PM »

you can measure the crank
but most Clevite brgs have a .010 stamped on the back of the shell , if there is nothing I would bet it is a std brg

67Vette427 · « **Reply #2 on:** September 14, 2006 - 01:52:09 AM »

Nothing on them. Going to need to find my mic. Thanks

OUTLAW · « **Reply #3 on:** September 14, 2006 - 02:28:20 AM »

what is the clevite #
if its CB527P its standard
CB527P 10 is 10 over

moper · « **Reply #4 on:** September 14, 2006 - 05:53:48 AM »

Yup..what they said..no oversize stamp means std size. What's the date on them? thats right above the part number...

67Vette427 · « **Reply #5 on:** September 14, 2006 - 11:24:06 AM »

The main has MB 1883 M with upper above it and 1 77

The rod has CB 527 P and above 8 78

Thanks, good info!

Author Topic: How do you tell if clevite bearings are std or otherwise...no size on bearing (Read 2539 times)

67Vette427

How do you tell if clevite bearings are std or otherwise...no size on bearing

Chryco Psycho

Re: How do you tell if clevite bearings are std or otherwise...no size on bearing

67Vette427

Re: How do you tell if clevite bearings are std or otherwise...no size on bearing

OUTLAW

Re: How do you tell if clevite bearings are std or otherwise...no size on bearing

moper

Re: How do you tell if clevite bearings are std or otherwise...no size on bearing

67Vette427

Re: How do you tell if clevite bearings are std or otherwise...no size on bearing