Author Topic: Removing the bucket seats  (Read 801 times)

Offline Grec

  • The '73 Chrysler should have made...
  • Full Member
  • ***
  • Posts: 974
Removing the bucket seats
« on: October 15, 2006 - 02:47:48 PM »
Going to be rust-proofing and sound deadening my floorboards.

Took a quick look at the seat brackets and didn't see the bolts right at the front and back that I'm used to on later model Japanese cars...

What's the trick?

Thanks, as always. :-)
1973 Challenger Rallye
- 440 Six Pack
- A833 4 Speed, 18 Spline
- FE5 Rallye Red on Black




Offline 71chmark

  • Full Member
  • ***
  • Posts: 771
Re: Removing the bucket seats
« Reply #1 on: October 15, 2006 - 03:25:26 PM »
They bolt to the floor from under the car. Should be readily apparent if you look under the car where the four corners of the seat would sit.
I may be schizophrenic,
but at least I have each other

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Removing the bucket seats
« Reply #2 on: October 15, 2006 - 03:54:22 PM »
They bolt to the floor from under the car. Should be readily apparent if you look under the car where the four corners of the seat would sit.

   :iagree:

  Maybe there might be  brace running across them, depending on the car... But yep, 4 bolts.


   Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Grec

  • The '73 Chrysler should have made...
  • Full Member
  • ***
  • Posts: 974
Re: Removing the bucket seats
« Reply #3 on: October 15, 2006 - 06:17:00 PM »
Gotcha.

Thanks, guys.
1973 Challenger Rallye
- 440 Six Pack
- A833 4 Speed, 18 Spline
- FE5 Rallye Red on Black