Author Topic: WANTED ASAP - DRVS SIDE Lower Control ARM!  (Read 812 times)

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
WANTED ASAP - DRVS SIDE Lower Control ARM!
« on: October 29, 2006 - 07:36:43 AM »
Well, I am pretty sure the Mechanic that I had try to press out all my bushings bent my  LCA trying to get the pivot arm out. He "couldn't" figure it out... :villagers: and there are deep gouges in the arm to prove it.

I need to replace it so I can put the suspension back together. Anything I buy must be know to be good and not junk please.




Offline dragfish

  • Jr. Member
  • **
  • Posts: 136
Re: WANTED ASAP - DRVS SIDE Lower Control ARM!
« Reply #1 on: October 31, 2006 - 04:36:04 AM »
I have a set of lower control arms non-swaybar.They are cleaned and painted.1 I believe has new bushing.PM for a pic.

Mark

Offline WINGNUT426

  • Jr. Member
  • **
  • Posts: 22
Re: WANTED ASAP - DRVS SIDE Lower Control ARM!
« Reply #2 on: November 02, 2006 - 06:53:33 PM »
Did you find one yet?  I have one with the swaybar bracket.  Pete
Pete Veight
Bridgewater Ct.
petev8@webtv.net

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: WANTED ASAP - DRVS SIDE Lower Control ARM!
« Reply #3 on: November 02, 2006 - 07:31:00 PM »
Where do you live? I think I got 1 extra and ready to go with new bushing installed but have to look to see if it's left or right. Its a sway bar type

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: WANTED ASAP - DRVS SIDE Lower Control ARM!
« Reply #4 on: November 02, 2006 - 08:42:27 PM »
Thanks guys! I am working on getting mine fixed locally. I think it might be the inner sleeve was bent and not so much the arm itself.  :woohoo:

Hope to know something soon.