Author Topic: Cam Lift - 1.5 to 1.6 (Read 1148 times)

nivvy · « **on:** November 24, 2006 - 09:09:29 PM »

What is the formula from going from 1.5 to 1.6 ratio rockers to determine new cam lift....thx

Killer_Mopar · « **Reply #1 on:** November 24, 2006 - 09:24:28 PM »

Take your current lift and multiply it by 1.06666666' for example if you were at .500 then multiply it by 1.0666666 and you will be at .5333333....

moper · « **Reply #2 on:** November 27, 2006 - 06:26:05 AM »

Not sure on that answer

... I take a cam's lobe lift and multiply it by 1.6.

Chryco Psycho · « **Reply #3 on:** November 27, 2006 - 10:57:40 AM »

generally it increases lift in the .030-.040 range so the answer would be close

Tubbed440 · « **Reply #4 on:** November 27, 2006 - 04:15:00 PM »

Divide the lift stated with the cam by 1.5. Then, multiply that number by 1.6. Then you have your new lift. This is the way the manufacturer would compute it. KillerMopar just showed you the "easy" way.

500/1.5=333.33 333.33 x 1.6 = 533.33

moper · « **Reply #5 on:** November 28, 2006 - 09:39:50 AM »

Thank you...I always struggled with math...lol.

Author Topic: Cam Lift - 1.5 to 1.6 (Read 1148 times)

nivvy

Cam Lift - 1.5 to 1.6

Killer_Mopar

Re: Cam Lift - 1.5 to 1.6

moper

Re: Cam Lift - 1.5 to 1.6

Chryco Psycho

Re: Cam Lift - 1.5 to 1.6

Tubbed440

Re: Cam Lift - 1.5 to 1.6

moper

Re: Cam Lift - 1.5 to 1.6